Rodeo S 2WD L4-2.2L (1999)
10.
Install driver and passenger finisher (to A - pillar inner panel), inner rail, upper spacer, four resin spacers, new front A - pillar trim cover, and door
finisher. (Figure 14 - 17)
11.
Install battery ground cable and set radio and clock settings.
Campaign Label
1.
Using a ball-point pen, fill out the following information on a campaign label (part 2-90028-700-0)
^
This safety campaign number: OOV-121 and Dealer Code
^
Repair Date: (Month/Day/Year)
2.
Affix the campaign label adjacent to the manufacturer's identification label located on the driver's side B-pillar.