Rodeo S 2WD L4-2.2L (1999)
3. Remove the regulator handle (1).
-
Pull the hook (2) out and remove the regulator handle.
4. Remove the power window switch (1).
-
Pry the power window switch out and disconnect the switch connector.
5. Remove the speaker cover.
6. Remove the front speaker.
-
Remove the front speaker fixing screws in order to disconnect the speaker connector.
7. Remove the inside handle fixing screw.
CAUTION: Take care not to apply excessive force on the inside handle link, lest this link is elongated, which could make it impossible to operate
the door with the inside handle.
