Rodeo S 2WD L4-2.2L (1999)
5. Remove the rear seat belt lower anchor bolt cover and the lower anchor bolt (5).
6. Remove the quarter trim cover (1).
-
Remove the tool box lid (3) and 3 fixing screws (4). Pry the quarter trim cover retainers (2) free from the body panel.
7. Remove the center lower trim cover.
-
Remove the front seat belt lower anchor bolt cover and lower anchor bolt.
-
Remove the sill plate and pry the trim cover clips free from the body panel.
8. Remove the center upper trim cover.
-
Turn up the finisher and pry the trim cover clips free from the body panel.
9. Remove the front pillar trim cover
-
Turn up the finisher and pry the trim cover clips free from the body panel.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the seat belt anchor bolt to the specified torque.
Torque: 39 Nm (29 lb.ft)
