Rodeo S 2WD L4-2.2L (1999)
Sunroof / Moonroof Switch: Service and Repair
Sunroof Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the sun roof switch (1).
-
Remove the switch by pushing the spring with the tip of a screwdriver.
-
Disconnect the switch connector.
Installation
Install, follow the removal steps in the reverse order.
Safety Stop Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the sun roof drive unit assembly (1) to remove the safety stop switch (2).
Installation
To install, follow the removal steps in the reverse order.
