Rodeo S 2WD L4-2.2L (1999)
2. Remove tailgate trim cover assembly (3).
-
Remove the 2 screws (2) holding the hatchgate lock assembly (1) first, and pull up the trim cover while detaching the clips from tailgate panel.
3. Remove waterproof sheet.
-
Remove waterproof sheet, exercising special care so as not to break it them.
4. Remove hatchgate lock.
-
Disconnect the lock link and connector and remove the 3 fixing bolts.
5. Remove key cylinder.
-
Disconnect the lock links.
-
Remove the key cylinder retaining clip with screw driver to remove the key cylinder.
6. Remove hatchgate lock actuator assembly.
-
Disconnect the actuator harness connector.
-
Remove 2 bolts holding hatchgate lock actuator assembly from inside.
7. Remove outside handle.
-
Remove the 2 bolts holding the outside handle from inside.
8. Remove tailgate lock assembly.
-
Remove 3 screws holding the lock assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
