Rodeo S 2WD L4-2.2L (1999)
3.
Apply three (3) 200 mm strips of double-sided acrylic foam tape, starting at the edge of the weatherstrip channel along the door (see figures 4 and
5).
4.
Align the weatherstrip lip with the corner of the door frame, re-install the weatherstrip with a plastic spatula along the weatherstrip channel (see
figures 6 and 7).
NOTE:
To reinstall the weatherstrip, align the weatherstrip lip with the corner of the door frame applying pressure along the Butyl Tape area and
weatherstrip to achieve maximum adhesive coverage. Make sure that the weatherstrip is correctly fitted flat along the weatherstrip channel (see
figures 6 through 9).