Rodeo S 2WD L4-2.2L (1999)
3. Install support bracket and tighten the bolt (7) to the specified torque.
Torque: 155 Nm (115 ft. lbs.)
4. Install caliper assembly.
5. Install lock bolt (9) and guide bolt (8) and tighten the bolt to the specified torque.
Torque: 74 Nm (54 ft. lbs.)
6. Install brake flexible hose, always use new gaskets and be sure to put the hooked edge of the flexible hose end into the anti-rotation cavity then
tighten the I-bolt / (10) to the specified torque.
Torque: 35 Nm (26 ft. lbs.)
7. Install wheel and tire assembly.
