isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Drum Brakes - Adjustment Procedure|Page 3574 > < Brake Drum|Specifications|Page 3569
Page 1
background image

Brake Shoe: Technical Service Bulletins
Drum Brakes - Adjustment Procedure

BULLETIN NUMBER:
IB01-09-8001

ISSUE DATE:
JUNE 2001

GROUP:
BRAKES

DRUM BRAKE ADJUSTMENT PROCEDURE

AFFECTED VEHICLES

^

1998 through 2001 2WD Rodeo and Amigo/Rodeo Sport vehicles with Rear Drum Brakes.

^

All 2002 2WD Axiom vehicles with Rear Drum Brakes.

SERVICE INFORMATION

Whenever the Rear Drum Brakes require service it is important to refer to the Workshop Manual. The service procedures have remained the same since
1998 Model Year and have indicated that all Drum Brake Adjustments require backing off the adjustment of the Parking Brake before performing any
adjustments on the Drum Service Brakes. Performing this procedure will increase brake performance and possibly increase the life of the Drum Brake
Lining.

As outlined in Section 5C of the current \Vorkshop Manual, the tirst two procedures require "fully releasing" the Parking Brake Handle and then
loosening the Parking Brake Adjustment. After performing the Drum Brake Adjustment, the Parking Brake must then be re-adjusted to specification.

Failure to properly adjust the Drum Brakes according to the Workshop Manual may cause certain brake symptoms to occur. in addition, the
Self-Adjuster (that is attached to the Trailing Shoe) may not perform to specifications. For more information on the operation and servicing of the Drum
Brake System and the Parking Brake System, refer to section 5C in the Workshop Manual

Drum Brakes - Adjustment Procedure|Page 3574 > < Brake Drum|Specifications|Page 3569