Rodeo S 2WD L4-2.2L (1999)
4. Remove P&B valve and bracket
5. Remove master cylinder.
6. Remove spacer and the 2 gaskets.
INSPECTION AND REPAIR
Master Cylinder
The master cylinder is not repairable and must be replaced as a complete assembly if found defective.
Inspection
Excessive brake pedal travel, malfunction or dragging brake suggests that the master cylinder is defective. In such cases perform the following visual
check:
Visual check
Make parts replacement as required if wear, distortion, nicks, cuts, corrosion, or other abnormal conditions are found through the following parts
inspection:
-
Master cylinder body
-
Fluid reservoir
-
O-ring
Functional Inspection of Master Cylinder Piston
Push the primary piston (1) with your fingers to check that it travels smoothly. If the motion is questionable, replace the master cylinder as a complete
assembly.
Functional Inspection of Master Cylinder
