Rodeo S 2WD L4-2.2L (1999)
Brake Proportioning/Combination Valve: Service and Repair
PROPORTIONING VALVE AND BYPASS VALVE SECTIONAL VIEW
The P&B valve contains two sections, each serving a different function.
The proportioning section of the P&B valve proportions outlet pressure to the rear brakes after a predetermined rear input pressure has been reached.
This is done to prevent rear wheel lock up on the vehicles with light rear wheel loads. The valve has a by-pass feature which assures full system
pressure to the rear brakes in the event of front brake system malfunction. Also full front pressure is retained in the event of rear brake malfunction.
The P&B valve is not repairable and must be replaced as complete assembly.
REMOVAL
1. The P&B valve is not repairable and must be replaced as a complete assembly. Care must be taken to prevent brake fluid from contacting any
painted surface.
2. Remove hydraulic pipes (1) and plug the pipes (1) to prevent the loss of fluid or the entrance of dirt.
3. Remove bolt (3).
4. Remove P&B valve (2).
INSTALLATION
1. Install P&B valve (2).
2. Install bolt (3) and tighten the bolt to the specified torches
Torque: 22 Nm (16 ft. lbs.)
