Rodeo S 2WD L4-2.2L (1999)
INSPECTION AND REPAIR
Visual Check
Make necessary parts replacement if cuts, nicks, excessive wear, or other abnormal conditions are found through inspection. Check the following
parts:
-
Yoke clevis
-
Valve body guard
-
Silencer
-
Filter plate and seal assembly
INSTALLATION
1. Install plate and seal assembly.
2. Install retainer.
3. Install 2 gaskets and spacer.
4. Install filter.
5. Install silencer.
6. Install valve body guard.
7. Install retainer.
8. Install lock nut and yoke clevis and tighten to the specified torque.
Torque: 20 Nm (15 ft. lbs.)
9. Install vacuum booster.
10. Install master cylinder and after installation, perform brake pedal check and adjustment.
