Rodeo S 2WD L4-2.2L (1999)
Connecting Rod Bearing: Specifications
Apply plastigage to the crank pin. Reinstall the rod caps (12) to their original positions and tighten the rod cap nuts to:
1st step ................................................................................................................................................................................................. 35 Nm (26 ft. lbs.)
2nd step ........................................................................................................................................................................................................................ 45°
3rd step ......................................................................................................................................................................................................................... 15°
Measure the width of the plastigage and determine the oil clearance. If the oil clearance exceeds the limit, replace the rod bearing as a set.
Standard .............................................................................................................................................. 0.006 mm - 0.031 mm (0.0002 inch 0.0012 inch)
Limit ............................................................................................................................................................................................. 0.12 mm (0.0047 inch)
