Rodeo S 2WD L4-2.2L (1999)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
2. Move drive belt tensioner to loose side by using wrench then remove drive belt.
3. Remove four crankshaft pulley fixing bolts, remove crankshaft pulley.
INSTALLATION
1. Install the crankshaft pulley to crankshaft flange.
2. Tighten four bolt to the specified torque.
Torque: 20 Nm (14 ft. lbs.)
