Rodeo S 2WD L4-2.2L (1999)
1st step: 35 Nm (26 ft. lbs.)
2nd step: 45°
3rd step: 15°
NOTE: Do not apply engine oil to the bearing back faces.
6. Oil gallery, refer to Crankshaft and Main Bearing.
7. Oil strainer and O-ring.
8. Install balance unit assembly, refer to Balance Unit Assembly.
9. Install oil pan support assembly, refer to Oil Pan and Oil Pan Support.
10. Install cylinder head gasket.
11. Install cylinder head assembly.
Refer to Cylinder Head.
