Rodeo S 2WD L4-2.2L (1999)
2. Install front exhaust pipe to exhaust manifold and tighten fixing nut to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
3. Tighten silencer side bolt to the specified torque.
Torque: 68 Nm (50 ft. lbs.)
4. Install exhaust manifold heat protector and tighten bolt.
Torque: 8 Nm (5.9 ft. lbs.)
5. Install intake duct bracket with ground cable.
6. Install intake duct assembly to throttle body and air cleaner then tighten nut to the intake duct bracket and clamp on the throttle body side, also
clamp air cleaner cover.
7. Connect PCV hose to air intake duct.
8. Connect battery ground cable.