Rodeo S 2WD L4-2.2L (1999)
Blower Motor: Service and Repair
Blower Assembly
Blower Assembly And Associated Parts
Blower Assembly and Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
3. Remove instrument panel assembly.
4. Disconnect resistor connector.
5. Remove duct.
6. Remove evaporator assembly (A/C only).
7. Disconnect blower motor connector.
8. Remove blower assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
