Rodeo S 2WD L4-2.2L (1999)
Compressor Clutch Relay: Service and Repair
REMOVAL
1. Remove the fuse and relay box cover at right side of engine room.
2. Refer to the diagram on the cover to determine which is the correct relay.
3. Insert small screwdriver or use thumb pressure to release the retainer of the relay.
4. Pull the relay straight up and out of the fuse and relay box.
INSTALLATION
1. Insert the relay into the correct place in the fuse and relay box with the catch slot aligned to retainer.
2. Press down until the catch of retainer engages.
3. Install fuse and relay box cover.