Rodeo S 2WD L4-2.2L (1999)
6. Pull the control lever assembly out and disconnect the fan switch and air conditioning switch connectors.
7. Remove control level assembly.
8. Disconnect control cables at each unit side.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Adjust the control cable.
-
Air source control cable.
1. Slide the control lever to the left (CIRC position).
2. Connect the control cable at the CIRC position of the link unit of the blower assembly and secure it with the clip.
-
Temperature control cable.
1. Turn the control knob to the left (MAX COLD position).
2. Connect the control cable at the COLD position of the temperature control link of the heater unit and secure it with the clip.
