isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Instrument Panel > < Malfunction Indicator Lamp|Description and Operation|Page 5623

Rodeo S 2WD L4-2.2L (1999)

Page 1
background image

Oil Pressure Switch: Service and Repair

REMOVAL

1. Disconnect battery negative cable.

2. Disconnect electrical connector at Oil Pressure Switch.

Oil Pressure Switch

3. Unscrew Oil Pressure Switch from Oil Filter Mounting Housing.

INSTALLATION

1. Install Oil Pressure Switch into Oil Filter Mounting Housing and tighten.
2. Connect electrical connector.
3. Connect battery negative cable.

Sensors and Switches - Instrument Panel > < Malfunction Indicator Lamp|Description and Operation|Page 5623