Rodeo S 2WD L4-2.2L (1999)
3. Tighten fixing bolt (1) of timing belt tensioner to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
4. Install timing belt front cover and tighten two bolts to the specified torque.
Torque: 6 Nm (4.4 ft. lbs.)
5. Install engine harness cover to front top of engine and tighten nut to the specified torque.
Torque: 6 Nm (4.4 ft. lbs.)
6. Install crankshaft pulley and tighten four bolts.
Torque: 20 Nm (14 ft. lbs.)
7. Move drive belt tensioner to loose side using wrench then install drive belt to normal position.
8. Connect engine harness three connector to chassis harness of left rear side of engine compartment.
9. Connect battery around cable.
