Rodeo S 2WD L4-2.2L (1999)
EGR Valve: Service and Repair
Linear Exhaust Gas Recirculation (EGR) Valve
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect electrical connector at EGR valve.
3. Disconnect the electrical connector at Intake Air Temperature Sensor.
4. Remove air intake duct. Refer to Air Intake Duct Removal Procedure.
5. Remove crankshaft breather hose.
6. Remove two bolts holding EGR valve.
7. Remove EGR valve and gasket from the manifold.
INSTALLATION
1. Place the gasket and EGR valve on to the intake manifold.
2. Install mounting bolts and tighten.
3. Connect electrical connector at EGR valve
4. Connect the crankshaft breather hose and secure it with clamps.
5. Install the air intake duct. Refer to Air Intake Duct Installation Procedure.
6. Connect the negative battery cable.
