isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Fuel Injector Coil Test / Fuel Injector Balance Test|Page 2416 > < Fuel Injector Coil Test / Fuel Injector Balance Test|Page 2414
Page 1
background image

Fuel Injector: Service and Repair

Fuel Injector
REMOVAL

NOTE:  If the fuel injectors are leaking, the engine oil may be contaminated with fuel. Check the oil for signs of contamination and change the oil and
filter if necessary.

NOTE:  Use care in removing the fuel injector in order to prevent damage to the fuel injector electrical connector pins or fuel injector nozzles. The fuel
injector is an electrical component and should not be immersed in any type of cleaner as this may damage the fuel injector.

NOTE:  Fuel injectors are serviced as complete assembly only.

1. Disconnect the negative battery cable.
2.  Disconnect electrical connector from fuel injector.

3. Remove the fuel rail. Refer to Fuel Rail Removal Procedure.
4. Remove the fuel injector retainer clip.
5. Remove fuel injector assembly from fuel rail.
6. Remove O-ring from the fuel injector.

Fuel Injector Coil Test / Fuel Injector Balance Test|Page 2416 > < Fuel Injector Coil Test / Fuel Injector Balance Test|Page 2414