Rodeo S 2WD L4-2.2L (1999)
Fuel Metering System: Description and Operation
Fuel Metering System Description
Fuel Metering / System Description
The Powertrain Control Module (PCM) is in complete control of this fuel delivery system during normal driving conditions.
The intake manifold function, like that of a diesel, is used only to let air into the engine. The fuel is injected by separate injectors that are mounted over
the intake manifold.
The Manifold Absolute Pressure (MAP) sensor measures the changes in the intake manifold pressure which result from engine load and speed changes,
which the MAP sensor converts to a voltage output.
This sensor generates the voltage to change corresponding to the flow of the air drawn into the engine. The changing voltage is transformed into an
electric signal and provided to the ECM.
With receipt of the signals sent from the MAP sensor, Intake Air Temperature sensor and others, the ECM determines an appropriate fuel injection pulse
width feeding such information to the fuel injector valves to effect an appropriate air/fuel ratio.
The Multiport Fuel Injection system utilizes an injection system where the injectors turn on at every crankshaft revolution. The ECM controls the
injector on time so that the correct amount of fuel is metered depending on driving conditions.
Two interchangeable O rings are used on the injector that must be replaced when the injectors are removed. The fuel rail is attached to the top of the
intake manifold and supplies fuel to all the injectors.
Fuel is recirculated through the rail continually while the engine is running. This removes air and vapors from the fuel as well as keeping the fuel cool
during hot weather operation.
The fuel pressure control valve that is mounted on the fuel rail maintains a pressure differential across the injectors under all operating conditions. It is
accomplished by controlling the amount of fuel that is recirculated back to the fuel tank based on engine demand.
