isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic] > < PCM - Code P1336 Set After Engine Replacement|Page 2471

Rodeo S 2WD L4-2.2L (1999)

Page 1
background image

Fuel Tank Unit: Service and Repair

Removal

1. Disconnect the battery ground cable.
2. Remove the fuel tank(1).
3. Disconnect the connectors, remove five screws and then remove the fuel tank unit(2).

Installation

To install, follow the removal steps in the reverse order.

Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic] > < PCM - Code P1336 Set After Engine Replacement|Page 2471