Rodeo S 2WD L4-2.2L (1999)
Fuel Pump Relay: Service and Repair
REMOVAL
1. Remove the fuse and relay box cover located right side of engine room.
2. Determine correct relay by consulting to the diagram on the cover.
3. Insert a small screwdriver or use thumb pressure to release the retainer of the relay.
4. Pull the relay straight up and out of the fuse and relay box.
INSTALLATION
1. Inserts the relay into the correct place in the fuse and relay box with the catch slot aligned to retainer.
2. Press down until the catch of retainer engages.
3. Install fuse and relay box cover.
