isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Throttle Body Unit <--> [Throttle Body] > < Throttle Position Sensor|Description and Operation|Page 2507

Rodeo S 2WD L4-2.2L (1999)

Page 1
background image

Throttle Position Sensor: Service and Repair

Throttle Position Sensor
REMOVAL

1. Disconnect the negative battery cable.
2. Disconnect the TPS electrical connector.
3. Remove the two screws and TP sensor from the throttle body.

NOTE:  Do not clean the TP sensor by soaking it in solvent. The sensor will be damaged as a result.

INSTALLATION

1. Install the TP sensor on the throttle body with two screws.
2. Connect the electrical connector.

3. Connect the negative battery cable.

Throttle Body Unit <--> [Throttle Body] > < Throttle Position Sensor|Description and Operation|Page 2507