Rodeo S 2WD L4-2.2L (1999)
Malfunction Lamp / Indicator: Testing and Inspection
Warning Lamp Does Not Come "ON" Steady
Circuit Description:
When the ignition switch is first turned ON, ignition 1 voltage is applied from the MA01 meter fuse to the AIR BAG warning lamp which is connected
to SRS warning lamp, terminal 7.The SRS-1 fuse apply system voltage to the ignition 1 inputs, terminals 12.The SDM responds by flashing the AIR
BAG warning lamp seven times. If ignition 1 voltage is more than 16 volts, the AIR BAG warning lamp will be still OFF solid with no DTCs set.
