isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Technician Safety Information|Page 4887 > < SRS Coil Assembly <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Specifications
Page 1
background image

SRS Coil Assembly: Technician Safety Information

Connectors

CAUTION:  Double-lock type yellow color connectors are used for supplemental restraint system-air bag circuit. When removing the cable harness,
disconnect the connector by unlocking at two places, outside (1) and inside (2). In such a case, do not pull the wires. Otherwise, wire disconnection may
occur. When connecting the double lock type SRS connector, insert the connector completely and lock at outside. Imperfect locking may cause
malfunction of SRS circuit.

Electrical Test Equipment

When using electrical test equipment, insert the probe of the tester into the wire side of the connector. Do not insert the probe of the tester into the
terminal side of the connector, and do not tamper with the connector. Inserting the probe into the terminal side of the connector, and tampering the
connector could cause malfunction of the SRS system or an error in inspection.

Use a probe with the correct tip. Do not insert the probe forcibly.

Technician Safety Information|Page 4887 > < SRS Coil Assembly <--> [Clockspring Assembly / Spiral Cable, Air Bag]|Specifications