Rodeo S 2WD L4-2.2L (1999)
Use specified service connectors in troubleshooting. Using tools which are not specified standard design could cause an error in inspection due to poor
metal-to-metal contact.
Wiring
Never attempt to modify, splice or repair SRS wiring.
NOTE: SRS wiring can be identified by special yellow outer protective covering.
Be sure to install the harness wires so that they are not pinched or interfering with other parts.
Make sure all SRS ground locations are clean and grounds are securely fastened for optimum metal-to-metal contact. Poor grounding can cause
intermittent problems that are difficult to diagnose.
