Rodeo S 2WD L4-2.2L (1999)
2. Connect the SDM harness connector (2) and after that, put CPA into connector (1).
3. Install air conditioning duct for rear seat to normal position.
4. Return carpet normal position.
5. Install right side stay between instrument panel and floor, tighten to the specified torque.
Torque: 10 Nm ± 3 Nm (87 lb.in ± 26 lb.in)
6. Install PCM with bracket and tighten to the specified torque.
Torque: 10 Nm ± 3 Nm (87 lb.in ± 26 lb.in)
7. Reconnect three connector to PCM.
8. Install the center console.
9. Install the transfer shift lever knob.
10. Install the dressing panel around the radio and reconnect cigar lighter harness.
11. Enable the SRS.
