Rodeo S 2WD L4-2.2L (1999)
Rear Seat
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate weather strip.
3. Remove the rear end floor trim cover.
4. Remove the luggage room light.
-
Remove the luggage room light lens (1) and the fixing screw.
-
Disconnect the luggage room light connector.
5. Remove the rear roof trim cover.
-
Pry the trim cover clips free from the body panel.
6. Remove the rear sill plate.
7. Remove the rear seat belt lower anchor bolt cover and the lower anchor bolt (5).