Rodeo S 2WD L4-2.2L (1999)
8. Remove the retaining bolt for the sensor and pull up camshaft position sensor.
INSTALLATION
1. Insert camshaft position sensor in position.
2. Install retaining bolt.
3. Install the timing belt cover and the retaining screws.
4. Install the crank shaft pulley and the mounting bolts. Holes for mounting bolts are off the pitch. The pulley can be mounted only one way to install
all mounting bolts. Tighten the bolts.
5. Install the drive belt.
6. Install the top harness cover onto timing belt cover.
7. Connect electrical connector to the sensor and securely lock it.
8. Install the spark plug cover.
