Rodeo S 2WD L4-2.2L (1999)
Check for continuity between commutator and shaft. Also, check for continuity between commutator and armature core, armature core and shaft. Replace
commutator if there is continuity (i. e. , internally grounded).
Brush
Measure the length of brush.
Replace with a new one, it it is below the limit.
Brush Holder
Check for continuity between brush holder (+) (4) and base (-). Replace, if there is continuity (i. e. , insulation is broken).
Magnetic Switch
Check for continuity of shunt coil between terminals S and M.
Replace, if there is no continuity (i. e. , coil is disconnected).