isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

All Technical Service Bulletins for Starter Solenoid: > < Symptom Related Diagnostic Procedures|Page 3965
Page 1
background image

Starter Solenoid: Customer Interest
Starter - Engine No Crank/No Start Condition

BULLETIN NUMBER:
IB00-04-S004

ISSUE DATE:
JULY 2000

GROUP:
ELECTRICAL

NO CRANK AND NO START CONDITION ON 2.2L HEC ENGINES

AFFECTED VEHICLES

All 1998 - 2000 Rodeo (UE) and Amigo (UA) models with 2.2L HEC engine

SERVICE INFORMATION

On 1998 - 2000 Rodeo (UE) and Amigo (UA) models with 2.2L HEC engine may encounter a no crank and/or no start condition. This may be due to a
poor or loose connection at the starter solenoid - main battery connection.

NOTE

Poor contact from the crimped washer at the bolt junction may be incorrectly installed, which may result in a damaged starter solenoid.

In order to correct the condition, inspect the crimped washer for looseness and perform a bench test on the starter. If the washer is loose, then the starter
assembly will need to be replaced.

All Technical Service Bulletins for Starter Solenoid: > < Symptom Related Diagnostic Procedures|Page 3965