Rodeo S 2WD L4-2.2L (1999)
7. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX driver or equivalent until the inflator module can
be released from steering assembly.
8. Disconnect the yellow 2-way SRS connector located behind the inflator module.
9. Apply a setting mark (1) across the steering wheel and shaft so parts can be reassembled in their original position.
10. Move the front wheels to the straight ahead position, then use steering wheel remover J-29752 to remove the steering wheel.
CAUTION: Never apply force to the steering wheel in direction of the shaft by using a hammer or other impact tools in an attempt to remove the
steering wheel. The steering shaft is designed as an energy absorbing unit.
