Rodeo S 2WD L4-2.2L (1999)
CAUTION: Left and right side must be equal within 30'.
NOTE: Overall thickness of caster shim and camber shim should be 10.8 mm (0.425 inch) or less. Tighten the fulcrum pin bolt to the specified torque.
Torque to 152 Nm (112 ft. lbs.)
TOE-IN
1. To adjust the toe-in angle, loosen the lock nuts (2) on the tie rod (1) and turn the tie rod. Turn both rods the same amount, to keep the steering
wheel centered . Toe-in: 0 ± 2 mm (0 ± 0.08 inch)
2. Tighten the lock nut to the specified torque. Torque to 118 Nm (87 ft. lbs.)
