isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Alignment|Page 4098 > < Alignment - Toe In Specification Change

Rodeo S 2WD L4-2.2L (1999)

Page 1
background image

Alignment: Specifications
Alignment

Front: 

Caster .................................................................................................................................................................................................................  2°30' ± 1°
Camber ..................................................................................................................................................................................................................  0° ± 30'
King Pin Inclination ........................................................................................................................................................................................  12°30' ± 30'
Toe-In .........................................................................................................................................................................................  0 ± 2 mm (0 ± 0.08 inch)
Steering Angle (Max):

Inside ......................................................................................................................................................................................  32.6° (+0°30' to -2°30')
Outside .................................................................................................................................................................................................................  31.8°

Rear: 

Camber ....................................................................................................................................................................................................................  0° ± 1°
Toe-In .........................................................................................................................................................................................  0 ± 5 mm (0 ± 0.20 inch)
Toe-Axis ......................................................................................................................................................................................................................  ± 1°

Alignment|Page 4098 > < Alignment - Toe In Specification Change