Rodeo S 2WD L4-2.2L (1999)
parts:
-
Upper control arm
-
Bushing
-
Fulcrum pin
INSTALLATION
1. Install fulcrum pin.
2. Install bushing by using installer J-29755 and J-39376.
3. Install plate.
4. Install nut and tighten fulcrum pin nut finger-tight.
NOTE: Torque fulcrum pin nut after adjusting buffer clearance. Buffer clearance: 22 mm (0.87 inch).
5. Install upper control arm assembly with the fulcrum pin projections turned inward.
