Rodeo S 2WD L4-2.2L (1999)
Suspension Spring ( Coil / Leaf ): Service and Repair
REMOVAL
1. Raise the vehicle and support the frame with suitable safety stands.
2. Support the rear axle case with a jack.
3. Disconnect brake hose at the crossmember.
4. Remove breather hose.
5. Remove upper link fixing bolt, nut and rubber plate on the rear axle case (left-side only).
6. Disconnect the stabilizer bar at the stabilizer link.
7. Remove the shock absorber from the axle case.
8. Remove spring insulator.
9. Remove the insulator and coil spring while lowering the rear axle case.
CAUTION: Be sure not to let the brake hose, parking brake cable, and breather hose extend to their full length.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection. Check the
following parts:
-
Coil spring
-
Insulator
INSTALLATION