Rodeo S 2WD L4-2.2L (1999)
4. Apply the setting marks (3) to the torsion bar and lower control arm, then remove torsion bar.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection. Check the
following parts:
-
Torsion bar
-
Height control arm
-
Adjust bolt
-
Rubber seat
INSTALLATION
1. Apply grease to the serrated portions, then install torsion bar. Make sure the bars are on their correct respective sides and align the setting marks
(3).
