Rodeo S 2WD L4-2.2L (1999)
^
There should be a minimum of 2 mm clearance gap between the mounting rubber at the upper half of both the left and right No. 1 body mounts.
(Figures 7 and 8)
16.
If the clearance is less than 2 mm, then continue to Step 17. If the clearance is at least 2 mm, then proceed to Step 33.
17.
Remove the front plastic door sill plate and kick panel, and lift the carpet to remove the No. 2 body mount bolt access plug. (Figure 9)
