isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

A/T Torque Converter - MIL ON DTC P1870|Page 2845 > < Fluid - A/T|Capacity Specifications|Page 2836
Page 1
background image

Fluid Filter - A/T: All Technical Service Bulletins
A/T Torque Converter - MIL ON DTC P1870

BULLETIN NUMBER:
SB00-05-S003

ISSUE DATE:
JUNE 2000

GROUP:
TRANSMISSION

1998-99 RODEO (UE): TORQUE CONVERTER (DTC 1870)
(Supersedes SB00-05-S002)

NOTE

Shaded information reflects revisions from the previous service bulletin.

AFFECTED VEHICLES

Certain 1998 and 1999 Rodeo (UE) models equipped with automatic transmission (serial number 5504006-5570892).

SERVICE INFORMATION

Condition:
The Malfunction Indicator Lamp (MIL) sets and Tech-II indicates the presence of Diagnostic Trouble Code (DTC) P1870 on vehicle equipped with
automatic transmission (serial number 5504006 - 5570892).

Cause:
Failed torque converter.

^

If mileage is less than 3,500 miles and Automatic Transmission Fluid (ATF) is in good condition and turbine shaft "O" ring is not damaged, then
replace torque converter.

^

If mileage is greater than 3,500 miles or transmission damage is suspected (transmission fluid is burnt-brown in color or other evidence of damage),
follow Workshop Manual procedures to diagnose and repair as needed.

NOTE

In this case, torque converter is not necessarily to be exchanged.

1.

Verify the following:

^

The vehicle has less than 3,500 miles.

^

The only DTC stored is P1870

^

Serial numbers falls within 5504006-5570892 located on the transmission identification plate.

A/T Torque Converter - MIL ON DTC P1870|Page 2845 > < Fluid - A/T|Capacity Specifications|Page 2836