Rodeo S 2WD L4-2.2L (1999)
8. Remove oil line hose (6).
INSPECTION AND REPAIR
Make necessary adjustments, repairs, and part replacements if wear, damage or other problems are discovered during inspection.
INSTALLATION
CLUTCH PEDAL ADJUSTMENT
1. With clutch switch.
1. Disconnect clutch switch connector.
2. Loosen lock nut, then turn switch out until there is a gap between the switch plunger and clutch pedal.
2. Loosen clutch master cylinder push rod lock nut. Turn push rod by hand to set clutch pedal height to within specification. Tighten push rod lock
nut.
Clutch Pedal Height: 178 - 188 mm (7.01 - 7.40 inch)