Rodeo S 2WD L4-2.2L (1999)
Differential Axle Housing: Service and Repair
AXLE HOUSING AND ASSOCIATED PARTS
REMOVAL
1. Raise the vehicle and support it with suitable safety stands. The hoist must remain under the rear axle housing.
2. Take out brake fluid.
3. Remove rear wheels and tires.
4. Remove drive/propeller shaft.
5. Drain the rear axle oil into a proper container.
6. Remove parking brake cable, release the connection between the cable fixing clip equalizer.
7. Move the clip aside and pull out the breather hose.
8. Disconnect the ABS connectors (1) and remove the brackets attached to the frame and center link.