Rodeo S 2WD L4-2.2L (1999)
To correct this condition, replace the axle breather, breather hose, and any axle seals that are leaking. All replaced old axle seals, breather, and breather
hose must be tagged and returned to AIMI Warranty Parts Return.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
Use the published labor operation:
Labor Time includes administrative time allowance.
SERVICE PROCEDURE
1.
Replace the leaking rear axle seals using the published procedure in the 1998 Rodeo (UE) Workshop Manual.
2.
Replace the rear axle case breather hose and the two breathers (1 at the rear axle case, and 1 at the end of the breather hose).
3.
Refer to the next section for returning replaced parts through AIMI Warranty Parts Return System.
HOW TO RETURN REPLACED AXLE SEALS, BREATHER, AND BREATHER HOSE
1.
Fill out and attach a Warranty Parts Tag to each of the replaced parts (axle seals, breather, and breather hose).
2.
Return all replaced and tagged parts to the following address:
AMERICAN ISUZU MOTORS INC.
ATTN: WARRANTY RETURN PARTS
16323 Shoemaker Avenue
Cerritos, CA 90703-2273
Technical Service Bulletin # SB99-07-S001
Date: 990201
Rear Axle Seal - Leakage
BULLETIN NUMBER:
SB99-O7-SOO1
ISSUE DATE:
FEBRUARY 1999
GROUP:
AXLE
