Rodeo S 2WD L4-2.2L (1999)
IMPORTANT:
Inspect the surfaces surrounding grommet to ensure that the grommet is completely seated on the washer tank surface.
10.
Apply soapy water on the filler neck to enable a smoother installation into the grommet hole.
11.
Install filler neck into washer tank and tighten bracket screw.
12.
Refill washer tank with windshield washer fluid to MAX line on filler neck, and verify that no leakage exists.
PARTS INFORMATION
Use Sublet Code BA for material allowance ($0.10 per vehicle). NOTE: One roll of Butyl tape should service 100 washer tank repairs.
WARRANTY CLAIM INFORMATION
Use the NEW labor operation shown.
Labor Time includes administrative time allowance.
Disclaimer
