Rodeo S 2WD V6-3.2L (1998)
2. Install oil gallery and tighten the bolts in two steps, in the order shown in illustration.
Torque:
1st step: 29 Nm (21 ft. lbs.)
2nd step: 55° - 65°
3. Install oil pipe with O-ring.
Torque: 10 Nm (89 inch lbs.)
4. Install oil strainer assembly with O-ring.
Torque: 25 Nm (18 ft. lbs.)
5. Install crankcase with oil pan.
Refer to installation procedure for Oil Pan and Crankcase.
6. Install cylinder head assembly.
Refer to installation procedure for Cylinder Head.