Rodeo S 2WD V6-3.2L (1998)
![background image](/isuzu/rodeo_s_2wd/v6-3.2l/Page-2295001.png)
Marker Lamp Bulb: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the side combination light (2).
- Remove three screws.
3. Remove the bulb (1).
- Remove the side marker light socket by turning it counterclockwise.
- Remove the bulb by turning it counterclockwise while pushing it at the same time.
Installation
To install, follow the removal steps in the reverse order.