Rodeo S 2WD V6-3.2L (1998)
Engine Control Module: Programming and Relearning
1. Step-up - Ensure that the following conditions have been met:
-
The battery is fully charged.
-
The ignition is "ON."
-
The Vehicle Interface Module cable connection at the DLC is secure.
2. Program the PCM using the latest software matching the vehicle. Refer to up-to-date Techline equipment user's instructions.
3. If the PCM fails to program, proceed as follows:
-
Ensure that all PCM connections are OK.
-
Check the Techline equipment for the latest software version.
-
Attempt to program the PCM. If the PCM still cannot be programmed properly, replace the PCM. The replacement PCM must be
programmed.