Rodeo S 4WD V6-3.2L (1999)
Cabin Ventilation Duct: Service and Repair
Rear Heater Duct, Defroster Nozzle and Ventilation Duct
Rear Heater Duct, Defroster Nozzle, Ventilation Duct and Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel assembly.
3. Remove center ventilation duct and side defroster duct.
-
Remove 5 screws.
4. Remove lap ventilation duct.
5. Remove instrument panel brackets.
6. Remove cross beam assembly.
7. Remove ventilation lower duct.
8. Remove rear heater duct.
-
Remove foot rest carpet and 3 clips.
9. Remove defroster nozzle.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Connect each duct and nozzle securely leaving no clearance between them and making no improper matching.
